Synco WAir-G1-A1 Ultracompact Digital Wireless Microphone System

Syncoder Encrypted Transmission Algorithm
Applying Frequency Hopping Spread Spectrum (FHSS) method, SyncoderTM Encrypted Transmission Algorithm is designed to pickup audio signals accurately by transmitting 128-bit encrypted signals and switching channels instantaneously during conflicts.

SyncoderTM technology provides a secure, stable, and hassle-free audio system while bypassing the frustration of dealing with licenses and frequency mandates, you can go anywhere in the world with Synco G1 which automatically gives you a strong signal in most scenarios.

Ready for Run-and-Gun
Taking advantage of 2.4GHz technology and SyncoderTM algorithm, Synco G1-A1 pairs up quality audio signal within 70 meters (Line-Of-Sight), which is more than enough for most filming scenarios and for those challenging environments with blocking obstacles in between(Non-Line-Of-Sight), the transmitting distance can still be up to 130ft/40m, makes it perfect for Mobile Journalists, Videographers with clear, optimized and consistent audios.

First Wireless Microphone with DSP (Digital Signal Processor)
For the essential of instant audio processing in live broadcasting scenarios, Synco integrated DSP technology for the first time in Synco G1-A1 Wireless Microphone. Analog signals captured from transmitter are converted to digital signals for audio recalibration and output instantaneously to receiver, in other word, the audio is already optimized during recording, saving a lot of time in post processing and ensures a high quality audio performance in live broadcasting.

All for cleaner and more detailed soundtrack
For restoring the subtle changes in sound, SYNCO G1-A1 refines 180Hz optional low cut filtering out specific low frequency noises, like wind, air conditioner, traffic noises for clear and clean sound output. 0-4 level receiver gain settings with adjustment range up to 10dB allow simple and effective optimization of signal levels. With real-time monitoring through a 3.5mm TRS headphone jack, G1 ensures you track the sound effect and make prompt adjustment if needed.

Support All Day Long Charge
Equipped with a built-in 400mAh lithium battery, the system could service 4 hours, satisfying majority of filming applications. With a specially technical solution in power design for G1(A1), you can charge two devices (1TX+1RX) via one power supply at the same time and enables it to get back to 50% power in 40 minutes, and 80% in 1 hour via quick charging technology.

As Tiny as Invisible
With a pocket clip on the receiver, it could be easily attached to the cold shoe of cameras. This ultra-compact transmitter and receiver weigh only 35g each, with the pocket-size dimensions of 52X42X16mm. It is tiny and lightweight to be invisible as fixed on camera or collar, whether using the built-in mic of the transmitter or the clip-on lavalier mic.

3.5mm TRS Output For Camera And Smartphone
The receiver has a 3.5mm TRS audio output that accepts the included 3.5mm TRRS phone cable and 3.5mm TRS camera cable. It applies to virtually all cameras and camcorders equipped 3.5mm input and Android/ iOS mobile devices, part of which may need Type-C or Lightning adapter (available separately).